官方说明书LINEAR Application Note 111 数据手册.pdfVIP

LINEAR Application Note 111 handbook /file/2625154 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2625154 Application Note 111 July 2007 LTC3219 User’s Guide by Marty Merchant INTRODUCTION address and Write bit is followed by the 8-bit sub-address The LTC®3219 is a 250mA LED driver which illuminates byte and an 8-bit data byte. 9 Universal LEDs (ULEDs). The ULEDs are considered The LTC3219 is a slave I2C device that only can receive universal because they may be individually turned on or data. off, set in general purpose output (GPO) mode, set to blink at a selected on-time and period, or gradate on and off at DATA BYTES a selected gradation rate. This device also has an external enable (ENU) pin that may be used to blink, gradate, or turn REG0 (Tables 3 and 4) is used to set the charge pump to on/off the LEDs without using the I2C bus. This may be Auto, Force 1x, Force 1.5x, or Force 2x modes. It is also useful if the microprocessor is in sleep or standby mode. used to prepare for a Quick Write, or set the gradation UP If used properly, these features may save valuable memory bit. REG1 through REG9 set the intensity and mode for the space, programming time, and