官方说明书sun 32-Gigabyte, 2.5-Inch, SATA Enterprise Solid-State Drive Guide.pdfVIP

sun 32-Gigabyte 2.5-Inch SATA Enterprise Solid-State Drive Guide /file/2596369 From ManualL ManualL collects and classifies the global product instrunction manuals to help users access anytime and anywhere, helping users make better use of products. Home: / Chinese: / This Manual: /file/2596369 32-Gigabyte, 2.5-Inch, SATA Enterprise Solid-State Drive Guide 32-gigabyte, 2.5-inch, SATA Enterprise solid-state drives (SSDs) can be used as storage devices in servers that support them. This guide describes the preinstallation considerations and tasks involved in installing an SSD in a server. Before You Begin Refer to the product documentation for the server into which you will install the SSD for the following platform- specific information: ■ Ensure that your system supports Serial ATA (SATA). ■ Verify that the configuration you intend to use is supported on your platform. For example, do not mix SSDs with other drive types without first verifying that such configurations are supported by the server into which you will install the SSD. Preparing for Installation 1. Before you install the SSD, verify that you have all of the hardware and information that will be required for the SSD installation, including the following: ■ If your server has a standard 2.5-inch drive tray into which you can install the SSD, you will receive only the SSD. ■ If your server does not have a standard 2.5-inch drive tray into which you can install the SSD, you will receive an SSD that is preinstalled in a bracket, which enables it to fit properly into the drive tray. ■ You will need to update firmware, including patches as needed, before you can install the SSD. Visit to determine whether updates exist for the SATA, host bus adapter (HBA), drive backplane, system BIOS, or OBP/system firmware that is installed on your system. Alternatively, you can access firmware updates from the