铜合金水平连铸数值仿真研究及其应用-农业机械化专业论文.docxVIP

AbstractContinuous casting is an advanced casting method, the principle of continuous casting is that to pouring molten metal in a special metal mold called crystallizer, casting solidification (crust), continuously drawn out from the other side of the crystallizer, and it can obtain any long or a specific length of castings. The method of simulation of the horizontal continuous casting was adopted in this thesis ,it has many advantages than the conventional casting.ProCAST software is developed by American USE ,it is a casting process simulation software, based on finite element method (FEM), the method of numerical calculation and the comprehensive solution of filling and solidification of castings and the cooling process of flow field, temperature field, stress field, electromagnetic field simulation analysis. ProCAST can satisfy the sand mold casting, lost foam casting; High pressure, low pressure casting; Gravity casting, tilt casting, investment casting, shell mold casting, squeeze casting; Thixotropic casting, touch into type, rheological casting and simulation requirements of continuous casting.With copper alloy casting can improve the production efficiency of copper pieces and the utilization rate of copper materials, if widely adopted this approach, is bound to help in the relative lack of copper resources in our country, can reduce the pressure on copper imports.This thesis mainly studies the ProCAST software for casting of copper tubes is used to change the copper alloy process of horizontal continuous casting simulation to do a detailed introduction, and then reusing software for horizontal continuous casting crystallizer copper alloy 450 shuangliu mould casting process simulation calculation. Due to the influence on the effect of casting parameters are various, for example, the initial casting temperature, casting, the dimensional parameters of the casting cooling method, copper casting speed of liquid, etc. So after a lot of simulation to change the