聚合物%2f液晶复合材料的制备、特性及应用研究.pdfVIP

ABSTRACT The combination of both polymer and liquid crystal to fabricate polymer liquid crystal devices, with the development of polymer materials, has attracted more and more attention. Polymer dispersed liquid crystal (PDLC) device has many advantages, such as preparing without polarizer, the simple operation process, realizing large-scale production and others. It not only improved properties of pure liquid crystal display in the field of display, also widely used in chemical, pharmaceutical, electronics etc. But with the development of the technology, the performance of pure PDLC can’t meet the technical and practical requirements, which still need to study. Nowadays, the polymer liquid crystal polymer slices (POLICRYPS)，a kind of new device，has become a hot spot of research which is a nano/micro composite structure made of slices of almost pure polymer alternated with films of well aligned nematic liquid crystal (NLC). There are many kinds of methods to prepare polymer liquid crystal device, wherein using the polymerization induced phase separation method is a promising method which has the advantages of liquid crystal droplet morphology of devices film regularity, uniform particle size distribution, simple operation and good repeatability. In this paper, the hybrid prepolymer solution preparation for PDLC made by the solution method which mixed NOA65 and E7 liquid crystal, then exposure by UV light to fabricated different system PDLC. The morphology of PDLC device observed by scanning electron microscopy (SEM),