关于DS18B20的外文翻译.docVIP

本科生毕业设计（论文）外文翻译 毕设题目：冷库温度控制系统的无线传感器节点设计 译文题目：DS18B20 单线温度传感器 外文题目：DS18B20 Single - wire temperature sensor 学 院： 信息科学与工程学院 专业班级： 电子信息工程0804班 学生姓名： 指导教师： DS18B20 Single - wire temperature sensor 一. FEATURES ● Unique 1-Wireinterface requires only one port pin for communication ● Each device has a unique 64-bit serial code stored in an onboard ROM ● Multidrop capability simplifies distributed temperature sensing applications ● Requires no external components ● Can be powered from data line. Power supply range is 3.0V to 5.5V ● Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5C accuracy from –10°C to +85°C ● Thermometer resolution is user-selectable from 9 to 12 bits ● Converts temperature to 12-bit digital word in 750ms (max.) ● User-definable nonvolatile (NV) alarm settings ● Alarm search command identifies and addresses devices whose temperature is outside of programmed limits (temperature alarm condition) ● Available in 8-pin SO (150mil), 8-pin SOP, and 3-pin TO-92 packages ● Software compatible with the DS1822 ● Applications include thermostatic controls, industrial systems, consumer products, thermometers, or any thermally sensitive 二. DESCRIPTION The DS18B20 Digital Thermometer provides 9 to 12–bit centigrade temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of –55°C to +125°Cand is accurate to
0.5C over the range of –10°C to +85°C. In addition, the DS18B20 can derive powerdirectly from the data line (“parasite power”), eliminating the need for an external power supply. Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1–wire bus; thus, it is si