发电机系统(终稿).pptVIP

GB100-001-PPT template presentation Vestas Wind Systems A/S GB903-003-V90-WTG installation 发电机 发电机系统 转子 / 定子 电磁学 电磁感应举例 1 三相交流电 交流感应举例 2 2 极定子 4 极定子 与电网同步 滑差 发电机系统 发电机生产商 发电机系统 发电机 - V80 发电机系统 电气设计 - V80 接线盒 V80 VRCC, 定子 接线盒 V80 VCS, 定子 V80接线, 滑环 滑环结构 - V80 滑环调节 - V80 V80 发电机温度测量 V80 发电机温度测量 发电机系统 机械设计 - V80 滑环风扇 - V80 VCS 发电机润滑 发电机系统 定子 定子故障 转子故障 故障报告 发电机故障 安全 - V80 Q8 开关错误调整的结果 安全 - V80 发电机 Purpose: Explain how to disconnect the generator, before repair and maintenance. Notes: Q7 is only for the VCS Machines Purpose: Explain how to connect the 3 phase grid Notes: In order to cut in the generator to the AC grid the following 4 definitions must apply: Voltage Frequency Phase position Phase sequence Phase Since the voltage in an alternating current system keeps oscillating up and down you cannot connect a generator safely to the grid, unless the current from the generator oscillates with exactly the same frequency, and is exactly in step with the grid, i.e. that the timing of the voltage cycles from the generator coincides exactly with those of the grid. Being in step with the grid is normally called being in phase with the grid. If the currents are not in phase, there will be a huge power surge which will result in huge sparks, and ultimately damage to the circuit breaker (the switch), and/or the generator. In other words, connecting two live AC lines is a bit like jumping onto a moving seesaw. If you do not have exactly the same speed and direction as the seesaw, both you and the people on the seesaw are likely to get hurt. Purpose: Explain about the term, Induction. Notes: Electrostatic induction is a method by which an electrically charged object can be used to create an electrical charge in a second object, without contact between the two objects. U1 U2 V1 V2 W1 W2 发电机故障 发电机故障 U1 U2 V1 V2 W1 W2 Motor tester Megger VRCC / VCS Rotor Motor tester Megger 发电机故障 发电机故障 安全 Q7 Slip rings Q8 Stator 安全警告 风轮锁 安全 Q8 breaker 安全警告 安全 安全警告 安全 总结 总结 了解发电机的基本原理