制作服装排码学习游戏MakeaMarkerGame.pptVIP

KT Board Length 47” × Width 35.5” × Thickness 0.25” × 3 Pieces (in 3 different color) Measure Tape Knife Rules 2 pieces of Fabric (58” in width, and longer than 47” ) Double side sticky tape KT board – Soft, light, and easy to cut Measure Tape– Longer than 50” KT board – Big one 3 hours × 4 people (incl. preparation time) Pattern: a revised Men’s woven shirt (reference PID 269415 with back yoke merge into one, 19 piece per unit; 3 sizes, S, M, and XL (1:1:1)) P:\Global Fit Standard Team\Costing Initiative\Costing Engineers\Brandy WangPDS Print all sizes you needed to 1:4 ratio (a legal size paper is enough for the biggest panel) In OptiTex PDS– Copy all symmetrical panels to 2 separate ones File ? Print working area Select “Scale”, enter ratio “0.25” Setup paper to be legal size 1 2 3 4 Run marker in the Nest ++ and get the result (Efficiency and Length). P:\Global Fit Standard Team\Costing Initiative\Costing Engineers\Brandy Wang\269415 MARK EFFICIENCY GAME - 58in_Result1.MRK In OptiTex Marker– Length :4yd 20.47” Efficiency: 87.0% If your KT boar has no limitation in length, you could make as long as you like. Time: 2 hours × 1 person Front view 2.5” 3” 14.5” 3” 47” To paste efficiency To write names 1:4 of 58” fabric width 1:4 to total length (marker length + 20% ~ 30 % excess length ) End Bar - 0.5”× 14.5” to prevent panels falling off at the end Prevent panels falling off fabric area Red Bar – 2”× 14.5” , not fixed on board, is movable, in order to check the final length KT boards are covered by fabric at light blue area Side view – Layers Adhere layers together with double side tape Side bar and End Bar- KT board Back ground board – KT board Solid fabric Plaid fabric End Bar - 0.5”× 14.5” to prevent panels falling off at the end Left End Right End 4 layers together Wrap fabric in between Set End bar one side covered with solid fabric and the other side is with plaid fabric Board Done! Solid side