复件M101OperatingandConfiguringCiscoIOSDevices.pptVIP

Objectives Upon completing this module, you will be able to: Use the available configuration tools to establish connectivity to the appropriate network device in order to complete the initial device configuration Verify the default configuration of each device, given a functioning access layer switch and router Objectives Upon completing this lesson, you will be able to: Set up console connections between Cisco network devices and a terminal, given a need to configure and monitor network equipment Describe the features of the Cisco IOS user interface Identify the differences between the user EXEC and privileged EXEC modes Cisco IOS Software Features Configuring Network Devices Configuration sets up the device with the following: Network policy of the functions required Protocol addressing and parameter settings Options for administration and management Catalyst switch memory has initial configuration with default settings Cisco router will prompt for initial configuration if there is no configuration in memory An Overview of Cisco Device Startup External Configuration Sources Cisco IOS User Interface Functions Cisco IOS Software EXEC Mode Cisco IOS Software EXEC Mode (Cont.) Summary The Cisco IOS software platform is implemented on all Cisco hardware platforms. You will use Cisco IOS software to communicate the configuration details that implement the learning objectives of this course. You can configure a switch or router from sources that are external to the device. Cisco IOS software uses a CLI as its traditional console environment. While Cisco IOS software is a core technology, Cisco IOS software operation details vary on different internetworking devices. The Cisco IOS software supports two EXEC command modes: user and privileged. ? 2002, Cisco Systems, Inc. All rights reserved. ICND v2.0—1-* ? 2002, Cisco Systems, Inc. All rights reserved. * ? 2002, Cisco Systems, Inc. All rights reserved. Operating and Configuring Cisco IOS Devices Module 1 ? 2002,