QA-003可靠性测试规范.pdfVIP

奈电软性科技电子(珠海)有限公司 可靠性测试规范 Reliability Testing Specification 1: 目的Purpose: 1.1: 本指示为物理实验室进行可靠性测试提供规范的测试方法,频率及其他 相关运作活动。 This instruction provides the normative testing method, frequency and other related activity for the reliability testing. 2: 范围 Scope: 2.1: 适用于 FPC 的成品板、半成品板以及进料检验等 Applicable for the finished/semi-finished product board of the FPC as well as the incoming material inspection 3:定义:Definition 3.1: 产品常规试验每批抽 5PCS 测试, Take 5PCS from each lot for the regular test. 4: 职责 Responsibility ： 4.1:实验员负责日常实验测试及设备的保养 Tester is responsible for the daily test and maintenance of the equipments. 5: 设备 Equipment: 5.1: 恒温锡炉 X-Ray 测厚仪 恒温恒湿试验机 盐雾试验机 抗剥离试验机 阻抗测试仪 金丝打线机,金线拉力机 测力计 耐电压测试仪 XYZ 测试 仪 镊子 钢勺 剪刀 烧杯 秒表 音乐器 显微镜 烘箱 烙铁等等 Solder pot, X-Ray gauge, Constant temperature humidity chamber, salt spray machine, peeling resistance machine, impedance tester, dynamometer ， Voltage resistance tester ，XYZ tester ,forceps, steel spoon, beaker, stopwatch, buzzer, microscope, searing iron ,over. 6: 环境 Environment: 6.1 各类可靠性测试都在物理实验室中进行 All kinds of tests are done in the physical lab. 标题：可靠性试验规范 文件号：QA-003 版本：10 第 1 页 共 13 页 奈电软性科技电子(珠海)有限公司 6.2 测试环境条件参照 RD-020 《车间环境管控规范》 Environmental Condition for the test: Temp: JemperatureRD-020 《Workshop Environment Control Speicfication》 7: 程序 Process: 7.1: 由各部门项目负责人根据产品试验要求开出《试验委托单》至物理实验室， 试验员则依据《试验委托单》的要求作业，作业后并如实填写《委托试验 报告》并复印至试验委托当事人。 Responsible person according to the test requirement of the product send out the Entrustment Test Sheet to the physical lab, testers shall do as required and then finish the Entrustment Test Report . 7.2: 产品常规试验，试