带CAD图纸-螺旋式破碎机设计[优秀机械毕业论文].pdfVIP

ABSTRACT In food production, not all of the raw materials are all processed into the final product, inappropriate processing of the part must be removed during processing. In the production process, but also depending on the sensory, physical and chemical indicators of the different requirements of certain components in the semi-finished products to be separation. Separation and the lack of broken blade and propeller. Tomato beater for a variety of fresh fruits and vegetables beating isolated, tomatoes beater in peoples lives play an increasingly important role, along with the improvement of living standards. Beater, engineering design and use, there are still some defects, such as parameter selection, such as irrational. The design of the beater still rely on empirical formulas, the choice of many parameters in the empirical formula empirically selected within a certain range, which makes the design of the beater backward, unable to raise design standards and improve product performance . Key word: beater; broken blade; propeller; motor; tomato slurry I 目 录 摘要 错误！未定义书签。 Abstract I 第 1 章 绪论 1 1.1 本课题的来源、基本前条件和技术要求 1 1.2 研究成果研究螺旋式破碎机设计目的和国内外现状概况 1 1.3 原料加工预处理工艺流程简介 3 1.4 国内外番茄打浆设备4 1.5 本章小结 5 第 2 章 螺旋式破碎机的结构设计 5 2.1 基本结构设计错误！未定义书签。 2.1.1 圆筒设计错误！未定义书签。 2.1.2 破碎桨叶设计 错误！未定义书签。 2.1.3 传动部分 错误！未定义书签。 2.1.4 机架 错误！未定义书签。 2.1.5 其他 错误！未定义书签。 2.2 本章小结错误！未定义书签。 第 3 章螺旋式破碎机设计参数的确定 6 3.1 滚筒的设计6 3.1.1 滚筒长度6 3.1.2 物料在滚筒内的时间 7 3.1.3 棍棒与筛筒之间的间隙 7 3.1.4 圆筒筛消耗功率的计算8 3.2 电动机的选择8 3.3 本章小结8 第 4 章 主要零件的结构设计与计算 9 4.1 皮带轮的设计与计算9 4.2 传动主轴的结构设计与计算 12 4.2.1 初步计算轴的直径 12 4.2.2 轴的结构设计 13 4.3 轴上零件的定位 13 4.4 确定轴上的圆角和倒角 13 4.5