粉末涂料介绍 1.ppt

Powder Coating Formulation 粉末涂料的配方 The choice of Raw Materials is influenced by: . The required film properties - Gloss and Colour - Hardness and Adhesion - Chemical and Weather Resistance 原材料的选择受以下几个因素的影响 涂层性能的要求 - 光泽与颜色 - 硬度和附着力 - 耐化性和耐候性 Powder Coating Formulation 粉末涂料的配方 2. Application techniques Corona and Tribo Electrostatic Gun or Bells Fluid Bed 2. 应用技术 - 静电 - 摩擦 - 流化床 3.Curing conditions Temperature Time 3. 固化条件 - 温度 - 时间 Manufacture of Powder Coatings 粉末涂料的生产 How is Powder Coating Made ? 怎样生产粉末涂料？ Preweigh 称料 Charging 投料 Pre-mixing 搅拌 Extrusion 押出 Cooling 冷却 Kibbling 触碎 Micronising 粉碎 Weighing 称量 Packing 包装 Manufacture Powder Coating Manufacture 粉末涂料的生产 Raw Material Storage 原材料的储存 Powder Coating Manufacture 粉末涂料的生产 Pre-weighing all Raw Materials 称取所有原材料 Copyright Akzo Nobel Powder Coatings Ltd. June 2000? abcda Powder Coatings World Leader in Powder Technology Introduction to Powder Coating 粉末涂料介绍 What is Powder Coating ? 什么是粉末涂料？ Powder Coatings were first introduced to the market in the mid 1950’s. 粉末涂料在20世纪50年代中期第一次被推向市场 The first finishes were thermoplastic, which were applied at very high film thickness and gave limited areas of application. 第一种产品是热塑性的，膜层很厚，应用受到限制 Today most powders are thermosetting, based on either Epoxy and or Polyester resin systems. 现在大部分是使用环氧和/或聚酯树脂的热固性的粉末涂料 What is Powder Coating ? 什么是粉末涂料？ The first pure polyester powders were introduced to the market if 1972, a development by Akzo Nobel Powder Group. 1972年，Akzo Nobel 集团推出了第一种纯聚酯粉末涂料 Most modern powder coatings are applied by electrostatic spray to a metal surface then passed through an oven to melt and cure to give a hard and durable film. 大部分粉末涂料是利用静电喷涂于金属表面后，进入烘箱熔融固化，最终提供一个坚硬稳定的涂层 The first building ever coated with polyester 第一幢使用聚酯涂料的建筑 Why Powder Coating ? 为什么用粉末涂料？ Powder coatings have been proved to be cost effective and pollution free alternatives to industrial solvent based paints: 粉末涂料与工业用溶剂性涂料相比，已被证明更具经济性和环保性 No VOC problems 无