空气弹簧构造-功能和辨识.pptxVIP

Air Spring Construction, Function Identification空气弹簧构造，功能与辨识;Construction 构造;Bellows/囊体 Styles/型号 Fabric/帘布线 Rubber/橡胶 Identification/辨识 End Closures/密封端盖 Bead Plates/缘板 Bead Rings/缘环 Rolled Plates/轧制缘板 Piston/活塞 Caps/端盖;Styles 型号;Rolling Sleeve/膜式;Rolling Sleeve vs. Convoluted膜式与囊式对比;Bellows Construction 囊体构造;Essentially 4 layers/四层构造 Inner liner to hold air/内衬层包裹空气 2 plies of fabric for strength/两层帘布加强层 Outer cover for protection from the environment/外层隔绝外部环境 ;Bellows Construction囊体构造;Fabric structure帘布层构造;Fabric Options帘布层选择;Fabric Options帘布层选择;Cord Bias Angle帘布线夹角;Style 333/333型;Why do you care? 你为何要关心;Lift Tilt Table提升台;Rubber 橡胶;Bellow Rubber Materials囊体橡胶材料;Chemical Resistance Chart化学物质耐受力表格;Why do you care? 你为何要关心;Press counterbalance压力平衡;Air Spring Construction Plant Tour空气弹簧构造工厂参观;Identification 辨识;Bellows Identification囊体辨识;Convoluted Styles囊式空气弹簧;Convoluted Bellows Style Number囊体型号;Convoluted Bellows Style Number囊体型号;1T or Reversible Sleeve Styles;Reversible sleeve style numbers膜式空气弹簧型号;Reversible Sleeve Style Numbers膜式空气弹簧型号;Smaller Reversible Sleeve Style Numbers小型膜式空气弹簧型号;Small air springs include the 1M1A, 2M1A, 2M2A M stands for micro actuator 小型空气弹簧包括1M1A, 2M1A, 2M2A, M表示微型，A表示制动装置 Does not require 0,7 bar internal air pressure to collapse properly 在回最低位置时不需要0.7 巴的内压 Intended for short stroke, low force applications 用以满足短行程、小载荷应用 1M1A is laterally stable and can be used as an Airmount similar to a convoluted part. The others require lateral support for Airmount applications. 1M1A具备横向稳定性，可应用于气动隔振器（类似囊式），而其它型号如用于气动隔振器则需要横向支撑;Style number 70 P 13 W70 mm flex member 70毫米柔性元件 76 mm Max OD 76毫米最大外径 3,5 bar max pressure 3.5 巴最大压力 45 kg lift 45 千克 提升力 13 mm stroke 13毫米行程;End Closures 密封端盖;Bead Plates/缘板 Bead Rings/缘环 Rolled Plates/轧制缘板 ;Bead Plates缘板;Bead Plates 缘板;Used on air springs with bead diameters of 114 mm to 310 mm 用于空气弹簧，直径从114毫米到310毫米 Made of plated steel sheet for corrosio