手机后壳注塑模具设计_优秀毕业论文.docVIP

手机后壳注塑模具设计 摘 要 注射成型是成型热塑性塑料的一个主要方法，可以一次成型形状复杂且要求精密的塑件。本设计主要是手机后盖注塑模具的设计，以此为例，介绍了常用注塑模具的设计方法和流程。首先对手机后壳结构进行了工艺分析，采用ABS塑件作为材料。根据制件所用材料的工艺性能，选择注射机。再根据制件质量要求及外形特点选取标准模架，将已经测得的手机后壳各部位尺寸代入公式进一步确定各零件的尺寸，进一步设计型腔、型芯、浇注系统、脱模系统等。接着对模具的材料进行了选择，以便设计出的结构可确保模具工作运行可靠。本设计主要用ProE进行手机后壳三维图形的绘制，最后使用AUTOCAD来完善装配图和各零件图。该设计方法对其他的一些不同结构产品的注塑模具设计有一定的参考价值。 关键词：手机后壳，注塑模具，ABS，模具设计 injection mold design for the rear cover of mobile phone ABSTRACT Injection molding is one of the main thermoplastics forming method, can be a complex shape and require precision for the plastic forming parts. This design is recited about mobile phone rear cover injection 没落的, as an example, this paper introduces the design methods of injection mould and process. First of all, the rear cover structure of mobile phone is executed through technical analysis, and the pristine material is used ABS as the plastic parts. According to the stamping process performance of the materials used, the requirements of the quality and the shape the injection machine and standard mould frame are properly selected. The measured sizes of the mobile phone shell are generated into the formula to further determine the size of each part, and the cavity, core, pouring system, ejection system, etc. are further designed. In order to design the structure of reliable operation to ensure the mold work, the mould material is followed to choose. The 3-dimensional (3D) graphics drawing of rear cover of mobile phone is mainly designed using the software of Pro/E. Finally, the assembly drawing and part drawing is improved by using the software of AUTOCAD. This design method of injection mould supplies a certain reference to other different structure product design. KEY WORDS: Rear cover of mobile phone，Injection mold，ABS，Mold design 目　录 3 第1章 绪论 5 1.1模具在国民经济中的地位与作用 5 1.2塑料模具的发展现状 5 1.3塑料模具工业的发展趋势及存在的问题 6 第2章 塑件的成型工艺性分析 8 2.1手机后壳材料的选择与性能分析 8 2.1.1材料的选择 8 2.1.2 ABS材料的性能分析 9 2.2手机后壳塑件的测绘 10 2.2.1手机后壳塑件的二维图 10 2.2.2手机后盖塑件的三维图 11 2.3手机后盖塑件的结构分析 12 第3章 模