EMPIRE微波软件教程07-Tutorial-Reflector.pdf

EMPIRE XCcel Tutorial Reflector with waveguide feed Step 1 Set Simulation Parameters Topics •Start frequency = 5 GHz •End frequency = 25 GHz • 3D data import • Waveguide port •Press Start from Scratch • Far field • Near field •Open Simulation Setup •Set Meshing - PGA to ‘3D only’ Comment: PGA (Perfect Geometry Approximation) reduces staircasing effect for curved objects. It can be selected for flat (2D) or arbitrary (3D) geometries. 2 Vorlage Feb-10 © IMST GmbH - All rights reserved Step 2 Import Data file •Select from Menu: File – Import – 3D Solids – Import STL Object •Search reflector.stl (available in folder 7-data) •Confirm with OK •Open Layers, press + •Left click on the green box and enter name “reflector” - Right click to open the object property editor (keep conductor) - File - Save Comment: Name and property can be entered without opening the layer details with left/right click on layer name. 3 Vorlage Feb-10 © IMST GmbH - All rights reserved Step 3 Define Waveguide Port •Press Layers + “Create Layer” •Rename to “Port”, recolor, Close layer list •Press “Switch Autodisc Behavior” once •Switch to the “Front View” •Open Port Library, Create, Select Rectangular WG •Press height, adjust y: Start = -2