铝壳体压铸模具设计—毕业设计(论文).docVIP

铝壳体压铸模具设计 摘要：压铸是制造业的一种工艺，多用于汽车制造，机械制造等采用Pro／Engineer来实现的三维设计及模具成型零件设计，分析制件的成型质量，再采用EMX组件来实现模架的装配，并在产品设计及模具装配过程中，辅助以必要的理论计算，将数字化设计与理论计算结合起来，可以大大缩短产品研发周期、模具设计周期，提高产品设计及模具设计的准确性、产品成型质量，降低产品研发、模具设计成本。Pro/E； Die-casting mold design of Aluminum shell Abstract:Die-casting is a manufacturing process,it can mold the complex and high accurate metal product ,used in automobile manufacturing, machinery manufacturing and so on. The subject is about the design of Aluminum shell mold and process analysis. Considering the annual output, the equipmen of the factory and the requirement of precision of the plastic product,one cavities in a mould. Thelargest surface of the goods was choosed as the parting line to make goods by demold successfully. The products have heat sink,so it need lateral core pulling. Suspension and Positioning mechanism use matched guide pillar and guide sleeve to make movable mould, fixed mould to work accurately. The knockouts uses once ejecting mechanism that lifter pushes out. By the relation of the position of each part, cooling channels are designed to straight channels to cool effectively, quickly. With Pro/Engineer,AutoCad to implement three-dimensional design and mold volume design of the telephone receiver, and shaping quality of part was analyzed and the parting line was designed by Pro/Engineer, then utilized EMX to accomplish the assemblage of the mold with the assistance of essential theory calculate mixed with figure design. It would not only shorten the cycle of product research and mold design, and improve the preciseness and the product shaping quality, but also lower the cost of the research. Having made the rational craft scheme in the design process ,so it has met the requirement of producing in enormous quantities. Moreover, it also prepared a detailed document to ensure that the process for the smooth processing of mold and apparel production. Key word: Die casting；process analysis；Pro/E； 1 前言 1 1.1 课题内容 1 1.2 课题背景 1 1.3 课题的来源及要求 2 1.4