毕业设计论文-林区割灌机的结构设计.doc

全套CAD图纸，联系 本科学生毕业设计 林区割灌机的结构设计 系部名称： 机电工程学院 专业班级： 机械设计制造及其自动化08-3班 学生姓名： 指导教师： 职 称： 教 授 2012年6月 The Graduation Design for Bachelors Degree The Structure Design of The Forest Brush Breaker Candidate： Specialty： Class： 08-3 Supervisor：Lecturer. haerbin Institute of Technology 2012-06·Harbin  摘 要 本设计介绍了一种林区割灌机产品：自走式割灌机。设计中根据林区路面状况，以及清林抚育的作业情况，而设计出能够适应林区崎岖路面及道路狭窄等恶劣环境的自走式割灌机，具有很高的实用性和推广价值。 该自走式割灌机由行走部分，割灌部分，驾驶台以及排障部分等组成，可以锯切加工直径范围在10 ～80mm的灌木。整个机器由两个汽油机提供动力，一个提供行走动力，另一个提供割灌动力。锯片位于整个机器的前下端，由驾驶台控制杆控制其离地面高度，以适应林区路面状况。通过顶部的排障杆使高于机器顶部的灌木倒向预定方向，达到排障目的。该自走式割灌机结构简单，容易维修，操作简单。 在文章中，对该自走式割灌机的主要部件进行了设计计算（例如：皮带轮，轴，轴承，键，四连杆等 ），并对主要部件进行了系统的介绍和说明，对使用中涉及到的润滑，保养及注意事项也作了说明。 关键词：自走式；割灌机；割灌部分；行走部分；驾驶台；排障杆  Abstract A self preceded trash breaker, a new forestry machine has been presented in this paper. According to forest road surface conditions, and working situations of clearing fostering trees, the self-propelled brush breaker was designed to adapt to any atrocious environment, such as rugged road surface, narrowness of road and so on. It was highly practicability and generalizing value. This self-propelled brush breaker is consist of walking port, cutting port， and breaching of obstacles part and can saw brush in diameter range from 10mm to 80mm.The power of whole machine is supplied by two petrol motors, one is for running power，the other is for breaking brush power. Saw blade was under the machine，the control stick on driving stand control its height away from ground to adapt to the forest road surface condition. The bushes that are higher than the machine can be controlled by a pilot bar, which can make bushes fall along the pre-designed direction and get rid of obstacles. This structure of self-propelled brush breaker is simple, is easy to maintain, and is operated easily as well. The main parts of the self-prope