钻模体工艺规程及钻2-Φ6孔夹具设计精选.doc

摘 要 毕业设计(论文)是我们大学中的一次系统、全面的实践学习。在本次设计(论文)中，我所设计的是钻模体工艺规程及钻 2-φ6mm孔夹具设计。合理的工艺规程方案与夹具能保证零件加工的高效率和企业的经济性。我最开始进行资料收集，然后零件分析，再工序设计、接着进行工艺规程设计，最后完成夹具设计。在工艺设计中，我采用几种工艺相对比方法来获得最好的工艺路线，达到节约时间提高劳动生产率的作用。夹具设计是用一面双孔来定位及双升斜锲推动压板夹紧工件。利用这种夹紧装置，钻模体平稳的安装在夹具上，能方便于钻 2-φ6mm孔，也能保证孔的位置精度。综上所述，采用该专用夹具设计方案，保证了零件的大批量的生产，提高了劳动效率。所以，这是可取的。 关键词：零件分析，工序设计，工艺规程，一面双孔，夹具设计，位置精度 ABSTRACT Graduation (thesis) is a university system, a comprehensive study of practice. In this design (thesis), I designed the body Jig and Technology of drilling 2-φ 6mm fixture design. Reasonable technical point of order program and fixture components can guarantee the high processing efficiency and enterprise economy. I started the data collection and analysis components, and process design, and then order for the design process, Finally completed fixture design. In process design, process, I have used several methods relative to the best of the line, achieve energy savings, improve labor productivity functions. Fixture design is to use a dual-positioning and promoting or oblique cut workpiece clamping platen. Clamping the use of such devices, Jig is stable installation folder, specifically, will allow drilling in 2-φ 6mm hole, Holes can guarantee the accuracy of the location. In short, use of the special fixture design programs to ensure that the parts of large quantities of production, to improve the labor efficiency. Therefore, it is desirable. Keywords : Analysis parts ，Design process ，Process order，Dual side ，Fixture Design ，Positional Accuracy 目 录 中文摘要…………………………………………………………………………………Ⅰ ABSTRACT…………………………………………………………………………… Ⅱ 前言 第一章 零件分析……………………………………………………………………… 1 1.1 零件的三维图………………………………………………………………………1 1.2 零件的作用…………………………………………………………………………1 1.3 零件的工艺分析……………………………………………………………………2 1.4 确定生产类型………………………………………………………………………3 第二章 工艺规程设计…………………………………………………………………4 2.1 零件的毛坯制造形式……………………………………………………………… 4 2.2 基准的选择…………………………………………………………………………4 2.3 制定工艺路线………………………………………………………………………4 2.4 械加工余量及工序尺寸的确定………………………………………………………6