环形加热炉炉温控制系统的分析与设计word格式论文.docxVIP

优秀毕业论文 精品参考文献资料 Abstract Heating furnace the main energy consumption equipment in modern rolling mill, and also an important part to the quality of product. How to improve the combustion efficiency, raise the control rate and controlling precision of heating furnace are key problems in reducing consumption and improving the quality of products. Seamless pipe plant always use rotary hearth furnace as the heating equipment, the tutbe blank is heated and used for steel pipe rolling taking. The equipment use natural gas or the mixed gases of blast furnace and cookery as the fuel. The temperature control of rotary heart furnace is a complicated thermal processing procedure, which is characterized by mutual effect of multi variables, parameters time-variance, also large inertia delay link and non-linear of detecting signals. Routine PID temperature control has big fluctuation and low respond. Besides, the furnace condition is directly affected by the loading and unloading operations. It is difficult to stabilize the furnace pressure, establish mathematics model and achieve effective control. The background of this paper is the rotary heart furnace in Baotou Iron Steel Seamless Mill, and the “series double-crossing combustion control” is the base of fuzzy control. According to temperature change in different sections of the furnace and the actual figure of the furnace temperature, thus can achieve faster and shorter ascending and descending of temperature control. And also transition period will be shorter, inching adjustment volume will be smaller, then the surge times are fewer. Ensure that the dynamic adjustment performance of heating furnace during the change of thermal load, which fits the requirement of thermal load change of the heating furnace. It will not result in incomplete combustion or result from insufficient air supply or excess- oxygen combustion. Combustion loss and consumption are reduced, thus, can reduce consumption and improve the quality of products