基于三坐标测量机的齿轮参数测量技术分析-analysis of gear parameter measurement technology based on three-coordinate measuring machine.docxVIP

AbstractGear drive is the main way of mechanical transmission, so gear measurement technology has been the subject of attention in the field of engineering. Coordinate measuring machine in the industry is become more popular, but the dedicated gear measurement function modules and gear parameters measurement technology are insufficient. Propose the methods of gear parameters reverse and single error measuring based on coordinate measuring machines.Propose a method of gear parameters reverse based on coordinate measuring machines. Remove the abnormal measurement point and structure a new iterative formula, the more precise radius of base circle be measured, and the other parameters can be measured based on this.Propose a method of tooth pitch deviation and the tooth profile total deviation measurement method based on coordinate measuring machines. On the tooth pitch deviation and the tooth profile total deviation measured, typically need to pitch on reference circle. This article first to measure in the ministry of the tooth surface, and then translated to the pitch circle, calculate the error value.Gear measurement software development based on the VC++. Application of Visual C++ programming language, developed the software system that can realize the research content under the Windows environment with friendly interface, and the development of a data transmission interface was realized, can easily supply the measurement data of measurement software PC-DMIS to the gear measurement software.In the design, analyze the design model of involutes line spur gear and helical gear, use UG development tools of UG/open series, according to the characteristics of spur and helical gears, using the unified model parametric design, the parameterized design of the involutes gears was realized. The system structure be optimized, system operation becomes convenient. Developed gear database which can inquire, add and strike out the gear data.5 The method of measurement is feasible, a