在帧中继PVC上配置CBWFQ.pdf.pdfVIP

Cisco − Configuring CBWFQ on Frame Relay PVCs Cisco − Configuring CBWFQ on Frame Relay PVCs Table of Contents Configuring CBWFQ on Frame Relay PVCs1 Introduction1 Before You Begin1 Conventions1 Prerequisites1 Components Used1 Shaping and Queueing1 Cisco 7200, 3600, 2600 Series2 Cisco 7500 Series3 Choosing Where to Apply a Service Policy4 Known Issues4 Configuration Notes5 Related Information5 i Configuring CBWFQ on Frame Relay PVCs Introduction Before You Begin Conventions Prerequisites Components Used Shaping and Queueing Cisco 7200, 3600, 2600 Series Cisco 7500 Series Choosing Where to Apply a Service Policy Known Issues Configuration Notes Related Information Introduction This document provides sample configurations for configuring Class−Based Weighted Fair Queueing (CBWFQ) on a Frame Relay interface. CBWFQ is enabled with the bandwidth command, as configured in a policy−map with the commands of the Modular Quality of Service Command Line Interface (QoS CLI). Before You Begin Conventions For more information on document conventions, see the Cisco Technical Tips Conventions. Prerequisites There are no specific prerequisites for this document. Components Used CBWFQ is supported as of the following Cisco IOS® Software Releases depending on the platform: • Cisco 7500 Series with Versatile Interface Processors (VIP) (distributed CBWFQ) − 12.1(5)T