Avaya_CM6.0_说明.pptVIP

* * * * * * * * * * * * * * * * Changes with Communication Manager 6.0 Migrations only – no upgrades from previous CM 5.x Migrate translations plus certain platform data CM 5.2.1, 5.2.0 and 5.1.2 - UserLogins, Logs, etc. Licensing changes – use WebLM License authentication files get installed via System Platform Increased capacities * Boot Time Memory configurations Boot Time Memory (BTM) and Template Memory Sizes (configurable thru SMI with defaults set) Match survivable with the main Migrations from pre-6.0 used a standard or Xlarge memory configuration If the main was/is a standard, the LSP should be medium survivable. If the main was/is a xlarge, the LSP should be a large survivable. If the main was/is an S8300, the LSP should be a small survivable. CM_Duplex, CM_Simplex, CM_SurvRemote, CM_SurvRemoteEmbed templates default to large CM_onlyEmbed defaults to small * Changes with Communication Manager 6.0 Impacts to AIM, Avaya Integrated Management No AIW, Avaya Installation Wizard NRW, Network region Wizard, moved to separate standalone download SUM does manages firmware CM service-packs, not upgrades/migrations for CM 6.0 Additional details: Avaya Integrated Management 6.0 Eran Shapiro, Al Garcia Move items from CM to Utility Services ESD, Enhanced System Directory Phone and GW firmware file management including http server. Note TN firmware is not included in the Utility Services * Utility Services HTTP and HTTPS fileserver for IP phones Gateway firmware Scheduling and control of H323 IP phone firmware upgrades Control of IP phone settings via GUI settings editor MyPhone (self administration tool for IP phone users) CDR collection tools DHCP server Enterprise System Directory allowing LDAP lookups via IP Phones * * System Capacities There are some key capacity changes in CM 6.0 to align better with the Avaya reference architecture with Session Manager at the core Better CM SIP trunk capacities Increased station capacity Offer capacities are now set