毕业设计（论文）-电喷发动机典型元件检测.docVIP

西南交通大学 交通版(论文) 题目： 电喷发动机典型元件检测 作者： 摘 要 汽车是当今社会重要的交通工具。随着电控技术的飞速发展对汽车发展产生了巨大的影响。而电控的实现是依靠品种繁多的传感器，电控单元(ECU)，执行器集合而实现的汽车检测是从无到有逐渐发展起来，在20世纪的40-50年代国外的一些发达国家就出现了故障与性能的检测技术。提高了汽车的动力性，经济性，安全性，环保性。 国外的电控发动机元件检测技术主要呈现特点为制度化、标准化、智能化，自动检测化等主要特点。 我国是从20世纪60年代开始发展检测技术的，随着改革开放国民经济有较大的发展，我国的检测技术也得到了快速的的发展但是由于经济发展不平衡，存在着区域、城乡、国内外、阶层性的差异。则汽车行业的检测也存在着这样的问题，加之汽车行业的更新换代快，新技术新设备层出不穷，增加了检测特别是EFI元件检测的难度。为了检验三年来的学习成绩，也为了指导实际工作，本文按照电喷发动机发动机的结构及五大系统两大机构和传感器 电控单元 执行器的两条线索对电喷发动机的元件的进气压力传感器，曲轴位置传感器，水温传感器，节气门位置传感器等传感器按照工作原理对其检查检测进行论述，对电控单元，执行器的检测进行介绍。 关键词；电喷发动机，典型元件，检测 Abstract Cars are important means of transport in todays society. With the rapid development of electronic control technology, the development of the car had a huge impact. The implementation of electronic control is to rely on a wide variety of sensors, electronic control unit (ECU), the actuator achieved a collection of automobile testing is gradually developed from scratch, in the 20th century, 40-50 years, some developed countries to foreign A fault detection and performance. Improve the cars power, economy, safety, environmental protection.Electronically controlled engine components abroad detection technology is mainly characterized by features of the institutionalization, standardization, intelligence, automatic detection of the other major features.China is 60 years from the 20th century began to develop detection technology, with the reform and opening up a greater development of the national economy, Chinas test technology development has been rapid but uneven economic development because the existence of regional, urban and rural, domestic In addition, hierarchical differences. Detection of the automotive industry there are such problems, coupled with the upgrading of the automotive industry fast emerging new technologies and equipment, increasing the detection of EFI components, especially the difficulty of detection. To test the three years of academic performance, and to guide the practical