电气工程及自动化毕业设计（论文）-某大学四号九层实验楼强电电气设计.docVIP

毕 业 设 计（论 文） 中文题目 兰州交通大学四号实验楼 强电电气设计 英文题目 Electrical Design of No.4 Laboratory Buiding of Lanzhou Jiaotong University 学 院 自动化与电气工程学院 专 业 电气工程及其自动化 姓 名 学 号 指导教师 2012 年 6 月 10 日 摘 要 本设计为兰州交通大学四号实验楼强电电气设计。设计负荷等级为三级，进线电压为380/220V,照明用电负荷约为100kW。 设计的主要任务是完成兰州交通大学四号实验楼的照明平面设计、照明系统设计、供配电系统设计。设计主要内容包括：照度计算、灯具和插座的选择和布置、照明负荷计算、导线及其截面的选择、低压断路器电流整定、等电位联结安装及防雷与接地系统的设计。本设计采用单位容量法进行照度计算，采用需用系数法进行负荷计算，按导线长期允许载流量和电压损失选择导线截面，按线路最大工作电流和线路保护选择低压断路器。 由于本实验楼的实验室不需要动力系统的动力电，所以按普通实验室配置插座。照明回路和插座回路分别由不同回路供电，并在插座回路安装剩余电流保护器。按三类防雷建筑物进行防雷设计，接地采用具有专用保护零线的中性点直接接地系统 全套图纸，加Abstract The design is entitled with the electrical design of No.4 laboratory building of Lanzhou Jiaotong University. The load level of the project is designed as the 3rd hierarchy, and input voltage level is presented by 380/220V, and electricity for lighting load is about 100kW. The main task of the design is to complete the design of the illumination plane, the illumination system, and the supply and distribution system of the fourth experimental building located in Lanzhou Jiaotong University. The main design contents include illumination calculation, selection and arrangement of the lamps and switches and sockets, illumination load calculation, and the selection of circuits and cross sections, and the current setting of low voltage breaker, and equipotential bonding, and as well as lighting protection and grounding system and so on. Firstly, unit capacity method is applied to implement illumination calculation, and the needed coefficient method is applied to implement the load calculation, and the cross sections of the circuits are selected according to long-term allowable temperature rise and voltage loss, and the low-voltage breakers are selected according to the maximum working