2410和gprs模块的通信源代码及详解.docxVIP

2410和gprs模块的通信源代码及详解?JavaScript:d=document;t=d.selection?(d.selection.type!=None?d.selection.createRange().text:):(d.getSelection?d.getSelection():);void(saveit=window.open(/storeit.aspx?t=+escape(d.title)+u=+escape(d.location.href)+c=+escape(t),saveit,scrollbars=no,width=590,height=300,left=75,top=20,status=no,resizable=yes));saveit.focus();收藏昨天写了一个2410和gprs通信的小程序，模拟xp的超级终端与gprs通信的方式。用户从命令行界面输入命令，和超级终端下调试的时候是一样的，就不多说了。代码比较少，如下：#include?stdio.h#include?stdlib.h#include?string.h#include?unistd.h#include?fcntl.h#include?errno.h#include?termios.hint?open_port(void){?int?fd;?fd?=?open(/dev/s3c2410_serial1,?O_RDWR|O_NOCTTY|O_NDELAY);?if(fd?==?-1)?printf(Unable to open uart1\n);?else fcntl(fd,?F_SETFL,?0);?return?fd;}int?setup_uart(int?fd){?struct?termios oldtio,?newtio;?if((tcgetattr(fd,?oldtio))?!=?0)?{?printf(Save old error!\n);?return?-1;?}?bzero(newtio,?sizeof(newtio));?newtio.c_cflag?|=?(CLOCAL?|?CREAD);?newtio.c_cflag?=?~CSIZE;?newtio.c_cflag?=?~CSTOPB;// 1 stop bit?newtio.c_cflag?=?~PARENB;// No parity?newtio.c_cflag?|=?CS8;?// 8 bits data?cfsetispeed(newtio,?B9600);?cfsetospeed(newtio,?B9600);?//newtio.c_lflag |= (ICANON | ECHO);?//newtio.c_lflag = ~ECHOE;?//newtio.c_iflag = ~(IXON | IXOFF | IXANY);?newtio.c_cc[VTIME?=?0;?newtio.c_cc[VMIN?=?0;?tcflush(fd,?TCIFLUSH);?if((tcsetattr(fd,?TCSANOW,?newtio))?!=?0)?{?printf(Set new error!\n);?return?-1;?}}int?main(void){?int?i;?int?fd;?char?c,str[200;?fd?=?open_port();?if(fd?==?-1)?return?0;?i?=?setup_uart(fd);?if(i?==?-1)?return?0;?while(1)?{??for(i=0;?i200;?i++) str[i?=?\0;?i?=?0;??printf(GPRS-CMD #);?while((c=getchar())?!=?10)?{?str[i?=?c;?i++;?}?str[i?=?13;?str[i+1?=?\0;?i?=?write(fd,?str,?strlen(str));?if(i??0)?printf(write error!);??for(i=0;?i100;?i++)?usleep(100);?i?=?read(fd,?str,?200);?printf(%s\n,?str);?}}