考虑酸岩反应热的酸压温度场模型分析-analysis of temperature field model of acid fracturing considering reaction heat of acid rocks.docxVIP

Jingbian gas field, and the shortcomings of the process and the potential of point while affirming its value. Take a further laboratory studies to the acid system, screen the paid agent composition and the amount, analyzes the effects of amount of crosslinking agent to the acid crosslinking time and viscosity and the temperature tothe time of cross-linking. Determine acid - kinetic equation of rock at 60℃, acid -activation energy and the acid rock reaction of hydrogen ion effective mass transfer coefficient De using SAR Ⅲ acid rock disc reactor.In the base of previous model, add the acid rock reaction releasing heat to the fracture surface energy equation, discrete and give the coupled solution combined with the continuity equation, energy equation of fluid cracking. Take a calculation and simulation to one well in Jingbian using the experiment to obtain the cross-linked Acid Rock Kinetic Parameters and cross-linked acid Jingbian field acid fracturing sand carrying construction parameters, simulation results show that the convergence of the model, reasonable and consistent with the actual situation. After considering the reaction heat, the temperature change still affect the distance of acid.This paper build three-dimensional gap of the effective distance calculation model compound with three-dimensional velocity field model of acid, and gives the lumping method. In according of the simulation to a gas well data in Jingbian field, show the model can simulate and calculate the actual distance accurately, and it’s suitable for further study and application. In base of the model build, and then analysis the effect of construction emission, liquid temperature, the quatitive of surrounding rock, the original temperature gradient, porosity, casing diameter and other factors to shaft and fracture temperature field distribution in a specific time step,and then give some suggestions to the construction according to the simulation results.Keywords: Acid fracturing design,