考虑支座相关性的基础隔震结构地响应分析-ground response analysis of base-isolated structures considering bearing correlation.docxVIP

Deduced the bearing parameter identification methods based on sequential non- linear LS (Least Squares) and identified the parameters of the results of quasi-static testing of the lead rubber bearings. In accordance with the parameter identification results, create the influence coefficient function of changes of physical properties of the bearings (rigidity before the yield shearing force, yielded rigidity and yield-shearing force) with the variations of temperatures and axial loads.Studied the influence of temperature effects of lead rubber bearings on theearthquake response of eccentric and non-eccentric base- isolated buildings. As for the non-eccentric base- isolated buildings, after considering the temperature effects of the lead rubber bearings, the relative displacement will increase with the rise of the temperatures while the variation trends of bearing recoverability is related to the speed acceleration of earthquake stimulation. In low temperature environment, the vibration effect of the base-isolated building will be reduced or even cannot achieve the expected objective for vibration absorption. As for eccentric base- isolated buildings, after considering the temperature effects of the lead rubber bearings, though the isolation layer and the displacement of upper building are similar, calculation results under different temperature environment still has noticeable errors. Temperature effect has significant influence on the speed acceleration of the turning of the upper building. But it has only minute influence on the speed acceleration of the turning of the isolation layer, which is tiny enough to be ignored.To study the influence of axial load effect of lead rubber bearings on the base-isolated building, provide the physical model of axial load effect of lead rubber bearings, implant it into the motion formula of base- isolated building and analyze the earthquake response of base-isolated building in simultaneous horizontal and axial loads. A