[工程科技]分离膜水处理工艺及其系统设计.docVIP

分离膜水处理工艺及其系统设计 Separation membrane treatment technology of water and system design  摘要 分离膜技术作为一种新型的流体分离单元操作技术，与传统的分离工艺比较具有常温环境、低工作压力、无相变、无滤料溶出、高效、节能、环保、单元化、占地面积小等一系列特点，目前在水处理领域已得到广泛的应用。显现出较强的市场竞争优势。 分离膜技术应用过程中，设计占有举足轻重的作用。设计的优劣直接决定工程的质量。对于分离膜系统设计目前主要依据膜厂家提供的设计导则和工程人员的工程经验。而目前还无相应的国家设计规范或者标准。本人基于参与中石化在土库曼斯坦国脱盐分离膜工程设计，以本项目来介绍典型分离膜系统的设计。 本项目的产水量为35t/h，原水的水质达到国家生活饮用水水质标准，含盐量200ppm，要求处理后含盐量小于10ppm。系统主要的脱盐处理单元为反渗透处理，系统配制54支美国海德能公司高脱盐CPA2型反渗透膜元件，安装在9支6芯压力容器中，采用36：18的排列方式，回收率为75%。预处理工艺采用多介质过滤器+超滤，多介质过滤器选用北京万侯环境技术公司生产的WFG型过滤器。超滤膜选用的是日本旭化成UAN-620A型，共16支，分为两组。 关键词 分离膜工艺；系统设计；超滤工艺设计；反渗透工艺设计 Abstract Membrane technology as a new type of fluid separation unit operation, with the traditional separation process compared with normal temperature environment, low stress, no transformation, no media dissolution, high efficiency, energy saving, environmental protection, modules, small footprint And a series of features in the field of water treatment has been widely applied. The market showed relatively strong competitive advantage. Membrane technology application process, the design occupies a decisive role. Design a direct bearing on the merits of the project quality. The membrane system design based on the current film manufacturers to provide guidelines for the design, and engineering staff of engineering experience, And at present no corresponding national design specifications or standards. Based on my participation in Turkmenistan in the petrochemical engineering, design of the desalination membrane to the project to introduce a typical membrane system design. The project of producing water,35 t / h, raw water quality to the life of the country drinking water quality standards, salinity 200 ppm, to deal with after the salt content of less than 10 ppm. The main system for reverse osmosis desalination unit handling, the system prepared to Hyde 54 U.S. companies high-CPA2 reverse osmosis