活塞式空气压缩机曲轴的机械加工工艺及夹具设计.docVIP

编号 本科生毕业Piston air compressor of the crankshaft machining technology and fixture design 学 生 姓 名 专 业 机械设计制造及其自动化 学 号 指 导 教 师 分 院 年 月 摘要3L-10/8空气压缩机曲轴零件的机械加工工艺夹具的设计在夹具的设计过程中，主要?8；铣曲拐端面夹具主要用来铣空气压缩机曲轴曲拐端面。两夹具的夹紧元件都选用两个V形块和支承板 关键词曲轴 加工工艺夹具设计 Abstract The paper introduces 3L - 10/8 air compressor crankshaft machining process and fixture design. Mainly includes three parts: part analysis, design, technological procedures for fixture design. In Components analysis part, mainly introduced the analysis of the components, as well as its main problems process an