毕业设计（论文）晶体硅太阳能电池的扩散工艺研究.docVIP

毕业设计（论文）--晶体硅太阳能电池的扩散工艺研究 The Diffudion Technology of Crystalline Silicon Solar Cell ABSTRACT Solar cell technology has made great progress, it might be called the main power source of the future, the study of solar cells in particular, the photoelectric conversion efficiency is extremely important.Diffusion mading p-n junction is the core of crystalline silicon solar cells, and is one of the key to the good and bad quality of the battery. The main problem of this paper is the low-cost industrial production of crystalline silicon solar cells in the production of p-n junction in the diffusion process. Optimization of solar cell production process is also very important. For the diffusion process, the biggest problem to ensure high efficient battery capacity is how to protect the spread of uniformity, optimization of the uniformity of spread mainly take the temperature compensation technology.In this paper,experiment methods are adopted for optimizing diffusion uniform by analyzing diffusion air-flowing environment．the air-flowing environment，which is comprised of quartz boat,quartz block,SiC paddle etc,is controlled difficultly． good experimental method of optimization is proposed in gas flow, current design, the furnace temperature and other aspects , by experimental methods appling to industrial production, the proliferation of uniformity has been very good control. From the proliferation of uniformity on the electrical properties of solar angle, this paper experimentally analyzed the proliferation of different cell surface uniformity in the fill factor FF, shunt resistance Rsh, series resistance Rs, the open circuit voltage Uoc and conversion efficiency of Eff . Proved that by improving the diffusion process to improve the conversion efficiency of solar cells has broad prospects for development. KEY WORDS: crystalline silicon solar cells,diffusion technology, uniformity, efficiency 目 录 第一章 绪论 1 §1.1太阳能电池的应用领域 1 §1.2 我国光伏产业发展的状态及趋势 2 §伏产业的现状 2 § 光伏产业发展中的瓶颈与危