钢筋技术交底（Technical explanation of steel bar ）.docVIP

钢筋技术交底2（Technical explanation of steel bar 2） First, construction preparation: 1, according to the construction drawings, drawings and specifications, make single reinforcement, by the team in advance of various specifications, the level of steel raw materials, confirmed by building project supervisor foreman reinforced after the audit, submit the project material department to organize the batch approach. 2, after the reinforcement approach, timely sampling according to the test of mechanical performance re examination, retest qualified after processing can be used. 3, construction machinery preparation: broken steel machine, bending steel machine, welding machine, welding machine, electroslag pressure welding machine and straight thread mechanical connection wire machine and other installation and location, check whether the mechanical equipment is intact. And equipment operating instruction plate is hung beside the mechanical equipment. Two. Straightening and processing of steel bars: 1. The straightening machine of the first grade of the project is straightened. 2, steel cutting: cutting machine can cut the diameter of less than 40mm steel bar, according to the audit after the reinforcement sheet cut off. To ensure the cutting blade and the impact of blade edge distance, bar diameter 20mm should overlap 1-2mm, rebar diameter greater than 20mm should stay around 3mm, in order to ensure the cutting length of steel bar. In this project, the first grade reinforcing bar and the mechanical connecting steel bar are cut by the grinding wheel cutting machine, and the other steel bars are cut by the cutting machine. 3. Bending forming of reinforcing bar: The cutting steel bars are bent according to the reinforcement, the single floor number, the layering, the parts and the specifications. Reinforced grade by manual operation of hand wrench reinforced molding, reinforced grade end made 180 degree hook, the arc bending diameter of not less than 2.5 times the bar diameter an