单转子可逆式锤式破碎机设计（含全套CAD图纸）.pdfVIP

摘 要 本文介绍了单转子可逆式锤式破碎机破碎机,该破碎机功耗极低、 无扬尘、几乎无振动。使用寿命延长5～7 倍，易损配件费用底，结构简单， 操作容易，维修极为方便。它主要由电动机、架体部、转子部、格板、双 头螺栓、电机底座、主轴、圆盘 、轴套和弧板等组成。工作时,起动电机, 电机轴端的通过联轴器带动主轴转动，从而使转子转动并带动圆盘（即锤架） 用来悬挂锤头的。破碎机在运转时，锤架与物料接触，而造成磨损,物料在架体部件 内,细粉及细颗粒通过筛板分离落入下部,该破碎机广泛应用于金属、非金属 矿、冶金、材料、化工、磨料和建材等行业的物料破碎领域. 关键词： 破碎机 机械冲击 锤头 1 Abstract This text has introduced the taper type breaker of grog , this breaker is adopted and shears the principle in small, broken bits ultra and slowly rapidly. Have in small, broken bits efficiency high, consumption extremely low, have and raise dust, for vibration. Service life lengthens 5-7 times, apt to decrease the expenses bottom of the fittings, the structure is simple, It is easy to operate, it is extremely convenient to maintain. Mainly by motor, framework, other tube body, put on, turn tube, empty mandrel, big gear wheel, pinion, move it jaw board and quiet jaw board make up round in grades. While working, start and moderate the electrical machinery, the pinion which moderates the axle end of the electrical machinery drives the big gear wheel to rotate, Make and turn to move jaw board form first dynamic V round ring broken definitely tubes of underpart round, Supplies have charge - in tube drop, detailed powder and through sift detailed particle board separate and fall into and turn, Thick particle sift by toper board spread and enter V broken move jaw board cut and rubed definitely even, Turns from big particle into a tiny particle or the powder and falls, discharge from the funnel export . This breaker is applied to the supplies broken field in metal, nonmetal ore, metallurgy, material, chemica