伦茨(Lenze)系列变频器英文说明书.doc

EDB8600UEknze Operating Instructions Frequency inverters 8600 series These Operating Instructions are valid for controllers with the nameplate data: 8601E.6x.6x8602E.6x.6x8603E.6x.6x8604E.6x.6x8605E.6x.6x8606E.6x.6x8607E.6x.6x8608E.6x.6x8609E.6x.6x8610E.6x.6x8611E.6x.6x8612E.6x.6x8613E.6x.6x8614E.6x.6x8615E.6x.6xController type Built-in unit (Enclosure IP20) Hardware version + index Software version + index corresponds to the German edition of 22/11/1995 revised: Edition of: 12/02/1996 06/11/1996 How to use these Operating Instructions... To locate information on specific topics, simply refer to the table of contents at the beginning and to the index at the end of the Operating Instructions. These Operating Instructions use a series of different symbols to provide quick reference and to highlight important items. This symbol refers to items of information intended to facilitate operation. Notes which should be observed to avoid possible damage to or destruction of equipment. Notes which should be observed to avoid health risks to the operating personnel. 1 A General safety and operating instructions for drive converters in conformity with the Low-Voltage Directive 79/23/EEC General In operation, drive converters, depending on their degree of protection, may have live, uninsulated, and possibly also moving or rotating parts, as well as hot surfaces. In case of inadmissible removal of the required covers, or improper use, wrong installation or maloperation, there is the danger of serious personal injury and damage to property. For further information, see documentation. All operations serving transport, installation and commissioning as well as maintenance are to be carried out by skilled technical personnel. (Observe IEC 364 or CELEC HD 384 or DIN VDE 0100 and IEC 664 or DIN/VDE 0110 and national accident prevention rules!) For the purposes of these basic safety instructions, skilled technical personnel means