基于单片机录音笔设计与实现.doc

录音笔的设计与实现 摘 要 随着电子技术的飞速发展，数码录音笔已得到了越来越多的人得青睐，论文通过对多种录音笔的设计方案进行了比较，凌阳单片机录音笔介绍了凌阳单片机的集成开发环境。设计中采用了凌阳的功放芯片SPY0030利用了单片机其串行接口SIO实现上位机与下位机的通讯，利用UART的RS232接口与PC机232接口进行连接并设置了8位键盘和LCD显示的人机界面使用IDE进行了仿真调试，验证了系统设计的正确性实现语音数据的录制播放、暂停、循环播放、重复播放、选择上一段、选择下一段以及与PC机进行数据传输 ABSTRACT As the swift development of the electronic technology, the digital voice editor has become more and more favored nowadays. Through comparison and analysis to various design proposals of the digital voice editor, this thesis presents the designing process of a digital voice editor, using Lingyang single-chip microcomputer. First of all, we give an introduction for the selection of the designing proposal, and the IDE (integrated development environment) of Lingyang single-chip microcomputer. Secondly, systematical hardware designing is carried out, including the design of the output circuit, memory circuit, button-control circuit, LCD circuit and so on. In the designing, we adopt the Lingyang amplifier chip SPY0030, apply the single-chip microcomputer’s SIO (serial interface) to realize the communication between the host computer and slave computer, connect the UART’s RS232 interface with the PC’s 232 interface, and set the eight buttons as well as the human-computer interface. Then we have a modular software design, consisting of the module of the main program, the acquisition module, key scanning module and memory module for the voice signal. Meanwhile, we accomplish the design of the program flow and write the source code of the program. In the integrated development environment (IDE), the validity of the system’s designing has been verified through simulate debugging. The system can fulfill the functions presented on the buttons such as “record”, “play”, “pause”, “loop play”, “replay”, “last recorded file play”, “next recorded file play” and “data transmission with PC”, which represents the application significance of the design to a certain extent. Keyword: single-chip microcomputer, record, pla