风力发电机组齿轮箱的设计与分析本科毕业设计.doc

风力发电机组齿轮箱的设计与分析 摘要 随着不可再生能源的减少和生态环境的不断恶化，利用新能源的发电技术越来越被各国重视，并在全球范围内取得了非常大的进步。风能是一种可再生能源并且不会对生态环境造成污染，具有无可比拟的优点。所以世界各国也越来越重视风力发电技术。风力发电过程是机械能转换为电能的过程，在风力的作用下，叶片转动，转速再经过增速齿轮箱得到放大并推动发电机发电。由此可见风电增速齿轮箱是风力发电机的关键部件. 本课题主要是基于Pro/ENGINEER软件和ANSYS有限元分析软件对传动系统进行设计与分析。首先，根据工况设计传动系统各零部件的参数，采用Pro/E按照设计数据绘制各零件图，然后在pro/E软件的装配界面将各零件装配起来。使用Pro/E软件建模的时候，需要完全按照设计参数绘制。同时这样也可以大大提高效率。零部件绘制完成之后，将重要的零件导入ANSYS软件中进行模态分析，分析他们的频率特性并查看其振型。经过频率特性分析，确定我们的设计符合要求。 关键词：风力发电；齿轮箱；参数化建模；Pro/ENGINEER；ANSYS Design and Analysis of gearbox for wind turbine Abstract With the reduction of non-renewable energy resources and deterioration of ecological environment, new energy power generation technology with new energy is being getted more and more national attention, and the great progress has been made in the global scope. Wind energy is a renewable energy and does not cause pollution to the ecological environment, with there is nothing comparable to this advantage. So many states in the world have payed more and more attentionto wind power generation technology. Wind power generation is the process of converting mechanical energy into electrical energy in the process.the blades trotates under the action of wind, speed after the gearbox,then is amplified and drive the generator. Therefore the wind power gearbox is the key components of the wind turbine. First, according to the parameters of the working condition, design all parts of the transmission system, draw in Pro / E parts diagram with the design data, and parts assembled in Pro / E component environment.When we use Pro/E software to draw the parts,we need to be fully parameterized drawing. At the same time, it also can greatly improve the efficiency . After the parts completed, we should lead the important parts into ANSYS software to conduct modal analysis.we should get the frequency analysis and view its vibration mode. After the analysis of frequency characteristic, we make sure the design can meet the requirements. Keywords: Wind power; Gearbox; P