WorkNC 2017R2 2D加工培训教程英文版.doc

? Table Of Contents 1 - Introduction 2 1.1 - Training Guide Objectives 2 1.2 - Workzones 2 1.3 - Creating a Rib Axis 15 1.4 - Creating a Text along a Curve 17 1.5 - Creating a Text for Engraving Purposes 20 2 - 3-Axis Roughing Toolpaths 23 2.1 - Global Rough/Rerough 23 2.2 - Initializing the Stock Model and Calculating the Roughing Toolpath 39 2.3 - Displaying Toolpaths 43 2.4 - Opening the Toolpath Parameters Menu of a Toolpath 45 2.5 - Updating the Stock Model 45 2.6 - Reroughing 47 3 - Curve Machining Toolpaths 50 3.1 - Curve Machining Z Movement 50 3.2 - Pocketing 55 3.3 - Rib Machining 60 3.4 - Facing 62 3.5 - Tangent to Curve 64 3.6 - Cutter Compensation 75 3.7 - On-Curve Engraving 82 3.8 - Curve Remachining 87 3.9 - Chamfering 92 4 - Flats and Walls Machining Toolpaths 102 4.1 - Manual 2D 102 4.2 - Die Flats Roughing 107 4.3 - Die Flats Finishing 114 4.4 - Ignoring Surfaces that hide the Surfaces to Machine 126 4.5 - Wall Plunge Machining 129 1 - Introduction 1.1 - Training Guide Objectives This manual presents the basic key concepts concerning WorkNC features. The particular examples given in the manual may not concern all users or applications of WorkNC. The main goal of this manual is to provide users with the tools (knowledge and concepts) that may be applied to specific problems that they may encounter when working with the 2 ?-axis toolpaths of the application At the end of the training session, you should be able to: Create a rib axis Add a text on a part and convert it into curves Create a Workzone Program Roughing toolpaths Program Curve Machining toolpaths Program Flats and Walls Machining toolpaths Parts and Workzones used in this Training Guide CAD Files Workzones Plate_cover.xdw Wall_machining Flats_walls_machining Corner_smoothing.xdw Pumpe_engraving ? Pocket_holes.xdw Die_flats_machining ? Adjust_fillet.xdw Plate_wing ? Multi-sided_part.xdw Pump_body ? Pump_body.igs Compensation ? This training guide is not a comprehensive manual. For