变压器铁心接地监测系统设计.doc

毕业设计说明书 变压器铁心接地监测系统设计 学生姓名： 班级学号： 院、系、部： 电力工程学院 专业： 电气工程及其自动化（智能建筑电气） 指导教师： 合作指导教师： 南 京  Undergraduate Design(Thesis) THE DESIGN OF ONLINE MONITORING SYSTEM OF TRANSFORMER CORE GROUNDING CURRENT BY Supervised by Associate Professor School of Electric Power Engineering Nanjing Institute of Technology June 2011  摘 要 随着社会的发展和科技的进步，人们对用电量的需要越来越多，这就使得电力系统不断的扩大，这就对电力系统的安全性和可靠性提出了更严格的要求。而作为电力系统中核心设备的变压器的安全运行显得尤为重要，一旦发生故障，将严重影响人们的正常生活水平和国家经济建设。因此它的良好运行不仅对电网的安全具有重要的意义，而且对保证人们的正常生活有重要意义。传统的监测变压器状态信息的方法是外观检查、理化、高压电气试验和继电保护。这些传统方法仅仅能够提供变压器故障和事故后的滞后信息，即在事故过后才能获得状态信息。这与现代化状态维护发展趋势不相适应，虽然监测方法种类很多，却不能满足对变压器进行实时状态监测的需要。 本文的目的是设计一款基于LabVIEW平台采用NI公司的数据采集卡构建了虚拟信号发生器和数据处理系统，该系统可以实现信号发生、数据采集、信号滤波和响应电流分解。除数据采集由DAQ实现外，其他所有功能，包括数据存储、触发、控制、显示、用户界面等，均在PC机中用软件(LabVIEW)实现，提高了可扩展性、可维护性，降低了成本。 关键词 变压器在线监测虚拟仪器数据采集卡LabVIEW  Abstract With the social development and the advancement of technology, people need more and more electricity, which makes power systems continue to expand, which the power system security and reliability of the more stringent requirements. As the core of power system equipment, the safe operation of the transformer is very important, in the event of failure, will seriously affect peoples normal living standards and national economic development. So its good to run not only on the grid security is of great significance, but also to ensure that peoples normal life is important. The traditional method of monitoring transformer state information is visual inspection, chemical, high voltage electrical testing and protection. These traditional methods can only provide the transformer fault and delay information after the accident, that after the accident to get status information. This is incompatible with modern state maintenance trends, although many types of monitoring methods, but can not satisfy real-time