浅论车削加工中振动与控制.docVIP

浅论车削加工中的振动与控制【摘要】在机械加工中产生的振动都具有受迫振动和自激振动，与机床、夹具、刀具和工件组成的工艺系统的动态特性有关。详细分析了车削加工中振动的主要类型及产生的原因、振动的危害，并从刀具、夹具、切削工艺等方面提出了减小或消除振动的措施。 ?【关键词】车削低频振动;高频振动;消除措施 【Abstract】In the machine process creation of vibration all have is forced a vibration and from arouse vibration, and tool machine, tongs, knife and work piece the dynamic state characteristic of craft system for constitute relevant.Detailed analysis the car pare to process medium vibration of main type and creation of reason, vibration of endanger, and from the knife, tongs, sliced to pare craft’s etc. to put forward to let up or cancellation