冰库环境中无线传感器应用.doc

PAGE \* MERGEFORMAT14 无线传感器网络节点在冷库乙烯环境监测的应用  姓 名： 班 级： 学 号： 指导老师： 日期：  摘 要 目前的大多数冷库仍采用现场采集、现场控制的方式来储藏新鲜农产品，但存在着控制精度低，需要人工监测和设置相关参数等弊端。基于冷库和乙烯催熟保鲜等实际需求，我们设计了一种可以实时测量温湿度与乙烯气体浓度的无线传感器网络节点，可以通过Android手机对节点所处环境的设备进行远程监控，安装了乙烯传感器、DHT11温湿度传感器、BLE通讯模块等实现对冷库中乙烯浓度与空气温湿度的定时检测，数据经过节点的控制中心处理后，通过无线网络传输到手机端进行显示和反向控制。 关键词：冷库 传感器网络节点 无???传输 远程监控 Abstact At present, most of the cold storage still use field collection, on-site control of fresh agricultural products, but there is a low control accuracy, the need to manually monitor and set the relevant parameters, such as disadvantages. Cold storage and preservation etc. based on the actual demand of ethylene, we design a real-time measurement of temperature and humidity and ethylene concentration of wireless sensor network node, and remote monitoring and control of the equipment in the environment of the node can be carried out by Android mobile phone, then Ethylene sensor, DHT11 temperature and humidity sensors, BLE communication module to realize the timing of ethylene concentration and air temperature and humidity in cold storage. After the data is processed by the control center of the node, it will be transmitted to the mobile phone terminal through the wireless network in order to display and reverse control. Key words: cold storage sensor network node wireless transmission remote monitoring  目 录 TOC \o 1-2 \h \u  HYPERLINK \l _Toc389150043   HYPERLINK \l _Toc389150044 1 引言 4  HYPERLINK \l _Toc389150047 2 硬件设计 4  HYPERLINK \l _Toc389150049 2.1 无线传感器节点的硬件设计 4  HYPERLINK \l _Toc389150049 2.2 无线传感器节点各部分的选取 5  HYPERLINK \l _Toc389150049  2.2.1 STM32F1系列单片机 5  HYPERLINK \l _Toc389150049  2.2.2 BLE蓝牙模块 5  HYPERLINK \l _Toc389150049  2.2.3 温湿度传感器DHT11 6  HYPERLINK \l _Toc389150049  2.2.4 乙烯浓度传感器 7