整体叶盘叶片型面砂带磨削路径规划与机床空间轴系研究-path planning for abrasive belt grinding of blisk blade profile and research on machine tool spatial shafting.docx

Put forward suggestions to improve the checking method, give the improved chord error checking method.From the study of the relative position and orientation of the tool and the work piece in grinding process, fully consider the characteristics of belt grinding, analyzes the machine structural characteristics and each axis movement forms, establish the kinematic model of the machine, using the D-H method to solve each axis of motion parameters. Give consideration to the machine tool processing efficiency and quality of machine tool, research the grinding machine feeding speed.Use UG secondary development tools for the blade CAD model, through the blade surface analysis, access the position coordinates of each point on the blade, the normal vector and the surface curvature information. Finally, the theories and modeling methods discussed above are applied to a specific case ofblisk grinding simulation. Verify the feasibility of trajectory planning.Keywords: Blisk, Belt grinding ,Trajectory planning ,Axis Analysis目录中文摘要..........................................................................................................................................I英文摘要........................................................................................................................................ II1 绪论......................................................................................................................................... 11.1 选题背景 ................................................................................................................................ 11.2 叶片类自由曲面数控加工轨迹规划现状分析 ................................................................... 31.3 叶片类数控砂带磨削加工现状分析 ................................................................................... 41.3.1 砂带磨削技术简介 ..................................................................................................... 41.3.2 叶片类数控砂带磨削现状 ................................................................