皮带复卷机-4复卷参数(译).docVIP

1.OPERATING INSTRUCTIONS操作说明 4WINDING PARAMETERS复卷参数 4.1Roll quality纸卷质量 The rolls made with a winder or a rewinder must withstand package handling, storage, transportation and other extended handling. In addition, printing paper rolls require good runability in the printing machine. 复卷或者再复卷出的纸卷都必须经过打包处理，贮存，运输和其它延伸出来的处理。此外，印刷用纸卷要求要有很好的运行能力在印刷机上。 A good roll which meets the previously mentioned requirements is such, that its tightness, from the core to the surface, is even and preferably decreases evenly. All sharp changes in tightness and hardness negatively affect the characteristics of the roll. Furthermore, a good roll has straight ends, the core is as wide as the roll and in the middle of the roll. 一个好的纸卷要满足前面提到的要求那样，它的紧度，从纸芯到表面，平坦最好是均匀地缩短，在紧度和硬度上所有的突然变化都会对纸卷的规格参数造成不良影响。此外，一个好的纸卷端面要笔直，纸芯的宽度和纸卷一致并在纸卷的中间。 The figure shows the change in the radial compression pressure, representing the roll tightness as a function of the roll radius. 图表给出在压力压缩时径向的变化，表示纸卷紧度与纸卷半径的一个函数图。 Shape of a good roll structure一个好纸卷的结构外形 4.2Factors affecting the roll tightness and quality 影响纸卷紧度和质量的因素 4.2.1The factors affecting the roll tightness during winding 在复卷期间影响纸卷紧度的因素 ●Winding pressure in the nip between the drum and the roll 复卷时在底辊和纸卷间的压区压力 ●Strength difference between the drum and the set of belt rolls 底辊和皮带辊之间的压差 ●Web tension 纸幅张力 ●Running speed, acceleration and deceleration 运行速度，加速和减速 4.2.2Factors independent of the winder 复卷机以外的因素 ●Core characteristics 纸芯品质 ●Paper characteristics 纸质 ●Transport and storage 运输和贮存 ●Influencing factors in extended handling 延伸出来的处理中的影响因素 4.3Rider roll relief 压纸辊减压 Winding pressure is controlled by adjusting the loading of the rider roll as the roll diameter increases. 复卷压力控制由压纸辊根据纸卷的直径增加来调节加载 The rider roll is used in the initial stages of winding to give extra load to the rolls. In the later stages of winding, the rider roll load is relieved. In the final stages, the rider roll keeps the rol