外文翻译针对塑料注塑模具的参数控制的型腔布局设计系统 英文版.pdfVIP

Int J Adv Manuf Technol (2003) 21:807–819 Ownership and Copyright  2003 Springer-Verlag London Limited A Parametric-Controlled Cavity Layout Design System for a Plastic Injection Mould M. L. H. Low and K. S. Lee Department of Mechanical Engineering, National University of Singapore, Singapore Today, the time-to-market for plastic products is becoming on it and provides the mechanism for molten plastic transfer shorter, thus the lead time available for making the injection from the machine to the