毕业论文：基于PLC的企业污水处理系统.docVIP

基于PLC的企业污水处理 系统设计 Design of Factory 100tons sewerage disposal of Electric control system based on PLC 摘 要 随着现代生产工艺的飞速发展，现场对传动设备的快速性、连续性、系统性的要求越来越高。单台变频器的独立运行模式已经不能满足要求，多系统运行成为。所有的本地柜前操作已经发展为计算机集中远程自动控制模式。建立在计算机、PL、传动装置间数据通讯的基础上来实现现场设备的运行状态监控和控制命令的下达。  关键词: 污水处理；自动化控制系统；PLC；硬件配置软件设计 ABSTRACT With the rapid development of modern manufacturing technique, the spot is stricter requirements with rapidity, continuity and systematicness of system. The single transducer execute individually has lagged behind now. It is trend that many sets run together as a system. All local operation systems have already developed to automation mode before the control cabinet, in which the computer is a main role. The characteristics are all set up on the basis of the matter that the date of the computer, PLC and Transport unit is exchanged each ether. It will be realized that supervise operation status of the equipments and send the control orders. The paper introduces PLC application in the project of treatment urban wastewater, in which S7—400 series is applied and introduces the method of urban wastewater treatment. The paper also introduces the method of receiving date in the supervisory system plant the programmable controller has already become most important, most reliable and using the most extensive industrial control microcomputer of occasion now. In order to improve the operation management level of the sewage treatment plant, the supervisory system uses the S7-400PLC to constitute core of the system and is composed of each unit of the control system according to certain topological structure. According to the running situation of the benevolence and automatic control system of sewage treatment plant, recommend structures of the sewage treatment equipment, automatic control method and the function and application of every PLC work station in sewage disposal and summarize the good result of the automatic control system how promoting production efficiency and security an