ECTP – Crew Training课件.ppt

Showcase Upholstery Cleaning Showcase cleaning is the most aggressive upholstery cleaning process available. Showcase is the appropriate method for heavily soiled wet-cleanable fabrics. Showcase cleaning is a two-step process. The first step is shampooing. However, after shampooing, instead of toweling the fabric and applying a rinse solution with a towel, you then extract the Showcase/Shampoo solution. The second step is extracting the Showcase/Shampoo solution with an extractor, truckmount, or upholstery machine. The preferred method is to rinse and extract with Fabric Rinse and Color Set. Thank You That’s all folks * Introduce yourself and exlain how the ectp program works. Let them know to take notes just like back in school. If you say something more then once or just tell them to know it. Also let them know that they should be prepared to answer chapter review questions. And that the chapter review questions are very important for later in the day. Electrical Circuits Make sure an equipments switches are off before plugging it in. Before cleaning any electrical device or fixture, turn it off and unplug it. Tag the circuit properly to prevent someone from turning the power on. Disconnect or turn off equipment before replacing fuses. 772 Viper VacuumThe 772 Viper Vacuum is the workhorse of cleaning and maintenance businesses. Features of the Viper Vacuum The features of the Viper vacuum make it easy to maintain and to operate. Electronic Sensor System While the Viper Vacuum is operating, the Electronic Sensor System monitors the condition of the machine. Green Light – Machine is operating properly. Blinking Orange Light – Air flow is obstructed either by a full bag or by an obstruction in the vacuum hose. Replace the bag or remove the obstruction. Blinking Red Light – Brush drive motor is overloaded either by an obstruction in the brush or by the brush height being set too low. Remove the brush obstruction or readjust the brush height. To reset the Elec