TL1000型凸轮轴测量仪技术的方案.docVIP

TL-1000型凸轮轴综合测量仪 技术方案 Technical Scheme of the TL-1000 Type Comprehensive Camshaft Profile Surface Error Measuring Instrument 测量原理： 该仪器采用极坐标测量原理，由精密主轴和高精度光栅编码器生成被测量凸轮轴的圆分度，由径向精密导轨和长光栅传感器在径向方向上扫描凸桃形面每一分度对应的凸桃升程，测量出各凸桃的升程和相位角误差。 1. Measuring Principle This instrument adopts the pole coordinates measuring principle. The precision main shaft and the high accuracy encoder generate the round graduation of the measured camshaft, the radial precision guideway and the linear encoder scan in the radial direction the ascending stroke of the peach-shaped cam corresponding to each graduation on the peach-shaped cam profile surface，and then measure the ascending stroke error and phase angle error of this peach-shaped cam. 技术指标： 可测量凸轮轴轴向长度------------------------------ 1000 mm 测头径向测量行程------------------------------------ 120 mm 主轴回转半径------------------------------------------ 140 mm 最大承载重量------------------------------------------ 40 Kg 测头径向分辨率--------------------------------------- 0.0001 mm 主轴回转分辨率--------------------------------------- 0.0001 ° 升程误差测量重复性--------------------------------- 0.002 mm 相位误差测量重复性--------------------------------- 3′ 升程误差测量准确性--------------------------------- ±0.003 mm 相位误差测量准确性--------------------------------- ± 3′ 2. Specifications: Measurable axial length of the camshaft ---------------------- 1000mm Radial measuring distance of the measuring head ----------- 120mm Turn radius of the main shaft ----------------------------------- 140mm Maximum permissible weight ---------------------------------- 40kg Radial resolution of the measuring head ---------------------- 0.0001mm Turn resolution of the main shaft ------------------------------- 0.0001? Measurement repeatability of the ascending stroke error ---- 0.002mm Measurement repeatability of the phase error ----------------- 3? Measurement accuracy of the ascending stroke error -------- ±0.003mm