A5191HRT型HART调制解调 毕业论文外文翻译.docVIP

译 文 原文题目： A5191HRT AMIS HART? Modem 译文题目： A5191HRT型HART调制解调器 学 院： 电子信息学院 专业班级： 自动化2009级04班 学生姓名： 学 号： 40905010435  A5191HRT AMIS HART? Modem 1. Features Can be used in designs presently using the SYM20C15 Single-chip, half-duplex 1200 bits per second FSK modem Bell 202 shift frequencies of 1200Hz and 2200Hz 3.3V - 5.0V power supply Transmit-signal wave shaping Receive band-pass filter Low power: optimal for intrinsically safe applications CMOS compatible Internal oscillator requires 460.8kHz crystal or ceramic resonator Meets HART physical layer requirements Industrial temperature range of -40°C to +85°C Available in 28-pin PLCC and 32-pin LQFP packages 2. Description The A5191HRT is a single-chip, CMOS modem for use in highway addressable remote transducer (HART) field instruments and masters. The modem and a few external passive components provide all of the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect, and transmit-signal shaping. The A5191HRT is pin-compatible with the SYM20C15. See the Pin Description and Functional Description sections for details on pin compatibility with the SYM20C15. The A5191HRT uses phase continuous frequency shift keying (FSK) at 1200 bits per second. To conserve power the receive circuits are disabled during transmit operations and vice versa. This provides the half-duplex operation used in HART communications. Figure 2-1 28-Pin PLCC Pinout Diagrams (green non-green) Figure 2-2 32-Pin LQFP Pinout Diagrams (green non-green) Table 2-1 Pinout Summary 28-Pin PLCC, A5191HRTP/Pg (12197-504/508) Pin N0. Signal Name Type Pin description 1 TEST1 Input Connect to VSS 2 TEST2 - No connect 3 TEST3 - No connect 4 TEST4 - N