机械搅拌反应釜设计说明书.docVIP

学 科 过程设备设计 说明书题目 机械搅拌式反应釜设计说明书 姓 名 学 号 xxxxxxxxxx 电 话 xxxxxxxxxxxxxxx 院 系 机械与汽车工程学院 专 业 过程装备与控制工程xxxx班 指导教师 xxxxx xxxxxx xxxxxx 机械搅拌式反应釜设计说明书 摘要：夹套反应釜分罐体和夹套两部分，主要有封头和筒体组成，多为中、低压压力容器；搅拌装置有搅拌器和搅拌轴组成，其形式通常由工艺而定；传动装置是为带动搅拌装置设置的，主要有电动机、减速器、联轴器和传动轴等组成；轴封装置为动密封，一般采用机械密封或填料密封；它们与支座、人孔、工艺接管等附件一起，构成完整的夹套反应釜。 本课程设计题目是夹套反应釜，该设备是由筒体、夹套、搅拌轴、减速器和电动机等组成。本设计详细的论证了筒体直径、筒体厚度、筒体的高度设计，材料的选择以及强度、稳定性校核。本设计还涉及到夹套的选择，夹套厚度的计算；从多个角度分成十章分别对釜体厚度、釜体封头以及电机的选择，机架的设计，以及对应的凸缘、联轴器的选择方面做了详细的介绍。本设计中还对法兰、管法兰的选取做了详尽的介绍。本设计选用的是皮带传动，设计中对皮带的选择做了详尽的介绍。设计中参数选取恰到好处，不仅满足了设备的设计要求，而且使设备的操作弹性变大，运行质量得到了保证。 关键词：夹套反应釜；搅拌轴；夹套；封头；皮带轮；联轴器；法兰压力容器；设计  Abstract:Jacketed reactor tank and jacketed two parts, mainly consists of cylinder head and more for the medium and low pressure vessel;Stirring device of stirrer and stirring shaft, its form is usually by the process and decide;Set of drive device, transmission device is mainly include motor, reducer, coupling and the shaft, etc;Shaft sealing device for dynamic seal, generally USES mechanical seals or packing seal;Them with the pedestal, manhole, process took over, such as the attachments form a complete set of reaction kettle.This course design topic is jacketed reaction kettle, the device is composed of barrel, jacket, and stirring shaft, gear reducer and motor, etc.This design detailed demonstrates the cylinder diameter, cylinder thickness, the height of the cylinder design, material selection, strength and stability checking This design involves the choice of the jacket, the jacket thickness calculation;Divided into ten chapters, respectively from multiple angles of the kettle body thickness, kettle body, head, and the choice of motor, the design of the frame, as well as the corresponding flange, the selection of coupling is introduced in detail.This design also detail the select