车床手柄加工工艺及关键工序及工装设计说明书-毕业论文.docxVIP

毕业设计说明书(论文)作 者: 学 号： 系　部:机械工程系专 业:机械工程及自动化题 目:副教授 指导者： (姓 名) (专业技术职务)评阅者： (姓 名) (专业技术职务) 20 年 6 月毕业设计说明书（论文）中文摘要本次毕业设计是针对CA6140车床手柄座的制作进行实质性的研究,论文只要是通过5个部分对零件的加工方式进行说明,首先是对零件的工艺进行分析,根据分析的结果制定加工工艺路线,工艺路线的确定能很好的帮助制造者来完成零件,依照分析的路线来合理的进行工序加工,将每到工序的计算写入设计书中,然后绘制加工的工序卡.这样使得零件的制造能一目了然,并且对后面的夹具设计起到铺垫.当工序完成后针对其中的一道工序我们进行专用夹具的设计,本次毕业设计是针对φ14mm的孔进行加工,所以夹具的设计也是为了方便这道加工而设计的.夹具的设计关键是定位元件和加紧元件的选择.由于设计的需要我们还要运用到组合机床,所以这里也要考虑到专用夹具是否适合组合机床.组合机床的设计是针对φ14mm的孔夹具而设计的,按照实际情况本次设计选用了利式组合机床,选定后就组合机床的钻头,支撑杆,机床底座等进行相应的选择,以能最好的加工出此道工序.根据零件工序图和零件加工示意图,以及组合机床联系尺寸图,可以将零件和实际生产相联系.关键词 工艺分析 夹具 组合机床 加工工序毕业设计说明书（论文）外文摘要Title Block Handle Lathe Processing AbstractThe graduation project is a CA6140 lathe for the production of Block handle substantive research, Paper as long as it is through the five parts of the processing of parts means that, first of all parts of the process is to analyze the results based on an analysis of the development process route, process route can be a good help to identify the manufacturer to complete the parts, in accordance with the analysis of route to carry out a reasonable process processing, will be calculated for each process write to the design of the book, and then drawing card processing procedures. This allows the manufacture of spare parts can be at a glance, and on the back of the fixture design to pave the way to play. Modular Machine Tool Design φ14mm hole for fixture designed in accordance with the actual situation in the design of the selected combination of profit-type machine tools, machine tools, selected after the combination of bits, supporting bar, base, etc. machine corresponding options to be the most this is a good processing procedures.Processes in accordance with parts schematic diagram and spare parts processing, as well as the portfolio size machine linked maps, spare parts and can be linked to actual production.Keywords Process Analysis Fixture Modular Machine Tool Processing目 录1 绪论11.1 毕业设计的目的11.2 车床手柄座设计的基本情况11.