2500td新型干法水泥熟料生产线原料粉磨系统工艺设计 毕业论文.docVIP

摘 要 本次设计重点介绍的是00t/d新型干法水泥熟料生产线系统工艺设计。 根据原、燃料的数据分析，选用适当的石灰饱和系数、硅率、铝率，采用尝试误差法计算干料、生料的配合比，从而确定最后配方；求出配方后，根据配方比例和原、燃料数据分析，计算三大平衡，即物料平衡、主机平衡、储库平衡，并制定物料平衡表、主机平衡、储库平衡表；，计算物料平衡并绘制相关图表，对的选型计算，并通过计算验证主机生产能力平衡计算，填写主机设备生产能力平衡表。 说明书共分五章，分别涉及00t/d水泥熟料新型干法生产线的发展现状和趋势，原、燃料配料计算、三大平衡计算、系统工艺计算和结论的有关内容。每一章由若干小节组成，每节又分为基本设备介绍、主机平衡计算和设备选型计算等。在说明书后面附有参考文献。 关键词： 物料平衡 主机平衡 系统 配合比 Abstract This design is introduced 2500t/d of clinker NSP cement production line raw material grinding materials system process design. Firstly, according to the original data analysis, the fuel appropriate lime saturated coefficient, silicon rate, aluminum, try error rate method for calculating the ratio of raw material, dry, and finally formula, The formula, according to the formula and the original data analysis and calculation, the fuel, which three main material balance, the balance, the balance of permeating and make material balance, host balance, permeating balance sheet, Second key design of raw material grinding process, calculation material balance, and rendering calculation related chart, for the calculation of the selection of the grinding materials, and through computing verification host production capacity balance calculation, complete technical parameters of the main equipment production capacity balance sheet. Specification of five chapters, involving 2500t/d NSP cement clinker production situation and the developing trend of raw material and fuel, calculation, three ingredients equilibrium calculation, raw material system process calculation and conclusions related content. Each chapter consists of several vignettes, every day and into the basic equipment is introduced, the main equipment and equilibrium calculation selection, etc. In manual attached references. Key words: material balance host balance raw material system raw material grinding raw material mix 目录 I Abstract II 第1章 前言 - 1 - 1.1设计目的及意义 - 1 - 1.2水泥工艺及原料磨的发展现状 - 1 - 1.2.1水泥工艺发展现状 - 1 - 1.2.2原料磨的发展现状 - 2 - 1.3设