超强超韧轻质的石墨烯-碳纳米管复合纤维(英文).pptVIP

Reading Report;Spider silk-Spiderman;Strong, tough, lightweight polymer fibers are of great interest for various applications: ranging from composites for airplanes, vehicles to bulletproof vests. Fiber toughness is dramatically affected by microstructure, Microstructure design is an important area of textile research. ; CNT Graphene: The extraordinary properties of graphene and CNT motivate the development of methods for producing continuous, strong, tough fibres. ;Science 290, 1331–1334 (2000) ;Experiment;;Stress–strain curves of hybrid (RGOF /SWNT 1:1, red line), SWNT/PVA (green line) and RGOF /PVA (blue line) composite fbres. (b) Elastic modulus (circles), tensile strength (squares) and toughness (c) with G fraction (d) Comparison of toughness of prior-art materials;;Alignment of carbon nanomaterials and polymer chains in polymer composite fibres ;Discussion;;Toughening mechanisms for hybrid fibres ;Tough composite fibres through the hybridization of wrinkled RGOFs and SWNTs were fabricated. The toughness of the hybrid fibres (1:1 of RGOF to SWNT) exceeds that of any material yet reported. The mutual self-alignment of RGOFs and SWNTs occurs during spinning when these nanoparticles are present in the correct proportions. The post-spinning draw to produce orientation does not required, Toughness mechanism: The formation of an interconnected network of partially aligned RGOF and SWNT during solution spinning, which act to deflect cracks and allow energy-consuming polymer deformation. The use of RGOFs as a partial substitute for CNTs reduces fibre cost and facile solution processing can enable upscaled-fbre production. ;Thank You !