SURFACE MOUNT LED FLOOD AND LOADING ... - ….docx

PREREQUISITE BIDDING REQUIREMENTSAny manufacturer submitting a proposal or bid, to these specifications; shall meet the following conditions.The manufacturer of the apparatus herein specified; shall be wholly owned (100%) and managed by a Company, Corporation, and/or Parent Company that is wholly based, and permanently resides in the United States of America.The Company, Corporation, and/or Parent Company, and all assets belonging to such; shall be wholly owned and managed (100%) by the entities specified above.Any proposal, bid, or response to these specifications by any foreign based, owned, or managed (in part or in whole) Company, Corporation, and/or Parent Company; shall be cause for immediate rejection.Any proposal, bid, or response to these specifications by any Company, Corporation, and/or Parent Company, that is owned, operated, managed, or held in contract; in part or wholly by a partnership or other agreement; shall be cause for immediate rejection.Exceptions to these conditions will not be allowed under any circumstances.NFPA 1901-2009The National Fire Protection Association “Standard for Automotive Fire Apparatus, 2009 edition, is hereby adopted and made a part of these specifications, the same as if it were written out in full detail, with the exception of the section dealing with Equipment Recommended for Various Types of Apparatus. Bidders shall provide the equipment requested herein and the buyer shall supply the rest before the apparatus is put into service. It is the intent of the purchaser to purchase an apparatus that meets 100% of the minimum standards defined and outlined in NFPA 1901-2009 edition. There are to be no exceptions to this requirement. STATEMENT OF EXCEPTIONSThe proposed apparatus as described in this specification document and all related material with the bid package shall meet or exceed all applicable sections for the category of apparatus as defined by NFPA 1901 newest edition, unless specifically noted within this speci